$149.99  Commercial Projector Screen Installation (sku:00035)

Conduct a pre-installation survey to determine actual work to be performed. Secure the included mounting brackets to a standard frame or masonry wall, or ceiling. Mount and secure Projector Screen to wall or ceiling brackets up to level ceiling height of 12 feet (does not include motorized or non-manual type screens). Screens can be up to and including 100 inches in size, measured on the diagonal of the viewable surface. Review completed installation with customer. Clean up drywall dust or any debris caused by installation, a well as removal of any screen box and packing material. Have customer sign-off acceptance on work order.

$199.99 Projector TV on Stand Installation (sku:00029)

Conduct a pre-installation phone survey to determine actual work to be performed to coordinate time of arrival. Install the customers newly purchased Projector TV on the supplied stand using only exposed wire connections. Assemble and surface mount an up to 100" projector screen. (Excludes motorized types.) Integrate the Projector TV component(s) into an existing and working A/V system. No holes will be drilled, no wires hidden within walls, or any type of custom in-wall wiring included. Insure that all wires and cables are neatly dressed and wire ties are used when necessary. Program non-learning remote control device(s) (1 or more as required). Provide an educational demonstration of the newly purchased Projector.

$399.99 Projector Ceiling Mount (sku:00030)

Verify receipt and good condition of all boxes and components necessary to complete installation service. Unpack Projector. Do not destroy boxes in case Projector must be returned. Secure the customer-provided mounting bracket (not included) to standard ceiling. Mount the projector on standard, level ceilings up to 12 feet in height. Connect the Projector to a pre-existing AC power supply using neat wire management. Power cord will not be concealed in the wall/ceiling. If power is not located at the point the Projector is installed, power will be concealed via neat wire management and using paint-able track molding. Connect audio and/or video inputs and outputs to Projector. Conceal customer-provided audio and video cables in a standard frame wall, from the tuner source to the Projector, up to fifty (50) feet. In locations with inadequate access for standard wall fishing, or walls/ceilings with insulation, vapor barriers, or any other obstruction, the wire may be concealed by track molding provided by Installer. Wall drop of cable will include up to two cables wall run from the projector to the same location. Connect and configure any new or existing video and/or audio components provided by the customer in the same room. Connect projector to existing PC, Laptop, or non-wireless network as requested by the Customer. Placing speakers on shelf or floor. Neatly connecting and grouping all speaker wires and cables. (Does not include hiding wires or drilling holes for speaker cables and wires.) Program up to two (2) non-learning remote control devices to operate connected components. Remote control devices not included. An educational demonstration of the Projector and audio/video system, up to twenty (20) minutes. Remove all trash and boxes from the area and ensure the area is left in a neat/clean condition. Obtain customer satisfaction sign-off on work order and customer acceptance form.

Secure the customer provided mounting bracket to a standard and level ceiling not to exceed 12ft in height. (Additional charges may apply to fabricate or provide custom mounting on sloped, arched, cathedral, or tray type ceilings, if special licensing or permits are required, and if electrical outlets are to be added.) Assemble and surface mount up to a 100" projector screen. (Excludes motorized types.) Attach and conceal cables from tuner source by routing up to 25ft of customer-supplied cable through standard frame wall or drop tile ceiling. In locations that involve inadequate access for standard wall fishing to the wall where the wire is to be hidden, or the wire is to be hidden in a wall that contains insulation, vapor barriers, or any other obstructions, the wire may be concealed by installer provided track molding. Program non-learning remote control device(s) (1 or more as required) for the newly connected projector. Remove box and packing materials and leave area in neat and clean condition. Review completed installation, demonstrate basic features and obtain written customer satisfaction check-off.

Verify receipt and good condition of all boxes and components necessary to complete installation service. Unpack Projectors. Do not destroy boxes in case Projectors must be returned. Secure the customer-provided mounting brackets (not included) to standard ceiling. Mount the projectors on standard, level ceilings up to 12 feet in height. Connect the Projectors to a pre-existing AC power supply using neat wire management. Power cord will not be concealed in the wall/ceiling. If power is not located at the point the Projectors are installed, power will be concealed via neat wire management and using paint-able track molding. Connect audio and/or video inputs and outputs to Projectors. Conceal customer-provided audio and video cables in a standard frame wall, from the tuner source to the Projector, up to fifty (50) feet. In locations with inadequate access for standard wall fishing, or walls/ceilings with insulation, vapor barriers, or any other obstruction, the wire may be concealed by track molding provided by Installer. Wall drop of cable will include up to two cables wall run from the projectors to the same location. Connect and configure any new or existing video and/or audio components provided by the customer in the same room. Connect projectors to existing PC, Laptop, or non-wireless network as requested by the Customer. Placing speakers on shelf or floor. Neatly connecting and grouping all speaker wires and cables. (Does not include hiding wires or drilling holes for speaker cables and wires.) Program up to two (2) non-learning remote control devices per projector to operate connected components. Remote control devices not included. An educational demonstration of the Projector and audio/video system, up to twenty (20) minutes. Remove all trash and boxes from the area and ensure the area is left in a neat/clean condition. Obtain customer satisfaction sign-off on work order and customer acceptance form.

Verify receipt and good condition of all boxes and components necessary to complete installation service. Unpack Projectors. Do not destroy boxes in case Projectors must be returned. Secure the customer-provided mounting brackets (not included) to standard ceiling. Mount the projectors on standard, level ceilings up to 12 feet in height. Connect the Projectors to a pre-existing AC power supply using neat wire management. Power cord will not be concealed in the wall/ceiling. If power is not located at the point the Projectors are installed, power will be concealed via neat wire management and using paint-able track molding. Connect audio and/or video inputs and outputs to Projectors. Conceal customer-provided audio and video cables in a standard frame wall, from the tuner source to the Projector, up to fifty (50) feet. In locations with inadequate access for standard wall fishing, or walls/ceilings with insulation, vapor barriers, or any other obstruction, the wire may be concealed by track molding provided by Installer. Wall drop of cable will include up to two cables wall run from the projectors to the same location. Connect and configure any new or existing video and/or audio components provided by the customer in the same room. Connect projectors to existing PC, Laptop, or non-wireless network as requested by the Customer. Placing speakers on shelf or floor. Neatly connecting and grouping all speaker wires and cables. (Does not include hiding wires or drilling holes for speaker cables and wires.) Program up to two (2) non-learning remote control devices per projector to operate connected components. Remote control devices not included. An educational demonstration of the Projector and audio/video system, up to twenty (20) minutes. Remove all trash and boxes from the area and ensure the area is left in a neat/clean condition. Obtain customer satisfaction sign-off on work order and customer acceptance form.

Conduct pre-installation phone survey to determine work to be preformed. Secure included mounting bracket to standard frame or masonry wall, or assemble optional support stand. Mount and secure Projector TV to wall or ceiling. Attach and conceal cables from tuner source by routing up to 25 ft of cable through standard frame wall. Use installer provided track molding if no in wall access. Assemble and surface mount an up to 100 inch screen (excludes motorized). Integrate customers new Audio/Video equipment. Mount up to 5 speakers and subwoofer and conceal speaker wire with in walls, ceilings or beneath moldings. If the customer purchased in-wall speakers, install speakers in standard sheet rock type wall or ceiling. All wires/cables to be neatly dressed using wire ties. Clean up of any debris caused by installation. Program non-learning remote. Provide up to 20 minute demonstration of newly purchased Projector TV.